North Central Speed Shop - Clifton, Texas
carb
-
2X2 Inline Ball Bearing End Linkage
If you're running a 2 carb setup you'll need this. It is available standard progressive, ball bearing and polished! Works great with our 4v
-
2X2 Inline Linkage
If you're running a 2 carb setup you'll need this. It is available standard progressive, ball bearing and polished! Works great with our 4v - 2x2 adapter.
-
Ball bearing rod ends and center bearing
The center bearing is an EELCO exclusive. These ends are tapped for 1/4-28 RH thread. We are still counting the uses for these! Bright plated finish with stainless bearings.
-
Carb Arms
Carb arm with 1/4 inch tap pin. Part no. 2172 Carb arm with 3/16 inch tap pin.
-
Economy universal progressive
Universal fit economy series linkage. Features stainless steel fittings and rod. adjustable rate and progression.
-
Progressive dual four ball end
A simple install with ball end and progressive function. or tighten the set screw and run both carbs together!
-
3x2 ball bearing progessive Rochester OE arms
This linkage is to be used with the factory carb arms still in place.
-
3X2 Ball Bearing Progressive Low Profile
Designed for low profile manifolds such as Chevrolet, early Olds and manifolds with carb bases close to the plane of the manifold.
-
3x2 progressive ball bearing w/ holley 94 throttle shafts
This kit allows the replacement of all your throttle shafts.
-
3x2 progressive ball bearing w/ rochester throttle shafts
This kit allows the replacement of all your throttle shafts and moves the linkage to the passenger side; keeping the driver side clear for accelerator and kickdown linkage.
-
3x2 progressive ball bearing w/ stromberg throttle shafts
This kit allows the replacement of all your throttle shafts.
-
3x2 progressive universal ball bearing
High quality aluminum levers and ball bearing ends.
-
ball bearing rod ends and center bearing
Made from original dies.
-
Economy universal progressive 3x2
Made from high quality stainless and zinc plated parts. Infinitely adjustable progressive action.
-
4x2 inline linkage
Ball bearing progressive linkage for use on manifolds with carburetor place in a single line.
-
4x2 log style linkage
for use with log style manifolds. No progression. All four carbs work together.
-
4x2 staggered linkage
Ball bearing progressive linkage for use on manifolds with carburetor place in a staggered format.
-
Linkage for Man-a-fre style manifolds
This linkage is designed for use with all manifolds similar in design to the one pictured.
-
6x2 ball bearing universal progressive
This kit is for use on all log manifolds using Stromberg EE-1 or Holley 94 (2100)carburetors.
-
6X2 Linkage standard universal progressive
Just one of the many linkage kits we offer. Pictured is the standard six duece linkage with stainless shafts, bright zinc pivot pins and ball bearing cross-shaft.
-
6x2 low profile ball bearing progressive
Designed for use with manifolds that offer little clearance between the throttle shaft and the manifold runners. Recommended for Chevrolet, Y-Block Ford and Oldsmobile applications.
-
6X2 progressive ball bearing (Rochester)
Here is our famous ball-bearing 6 duece linkage on a Chrysler Hemi log manifold. This kit is for use on Rochester applications
